ZHENGOU GroupZHENG'OU

การใช้งาน

ปรับปรุงพื้น & พื้นเก่า

ฝุ่น คอนกรีตที่สึก และตารางการผลิตที่หยุดได้ไม่หลายสัปดาห์ สารแข็งตัวแบบซึมและพร้อมเมอร์สร้างผิวใหม่โดยไม่ต้องถอดโรงงานทั้งหมด

พื้นนี้ต้องทนอะไร

เข้าใจรูปแบบความเสียหายก่อนเลือกระบบ

  1. 01

    Dusting concrete coats products, machinery and air filters — and it gets worse every year.

  2. 02

    The schedule cannot stop for weeks — the floor has to come back between shifts.

  3. 03

    Old coatings, oils and contamination decide what the new system can bond to.

  4. 04

    Budgets differ per zone — one factory rarely needs one solution everywhere.

ปรับปรุงพื้น & พื้นเก่า

ระบบเคลือบที่แนะนำ

คัดเลือกตามภาระการใช้งาน — ไม่มีระบบสำเร็จรูป มีเพียงระบบที่เหมาะสม

02

Primer + new build-up renovation

โครงสร้างชั้น
Assess and repair slab → penetrating epoxy primer → mortar/filler → new topcoat per duty

When the slab is structurally sound but the surface has failed: rebuild the system without tearing out the concrete.

ลำดับการทำงานมาตรฐาน

พื้นเดียวกันกับวัสดุเดียวกันอาจใช้งานได้ยาวนานขึ้นหลายปีหากทำงานอย่างประณีต หกขั้นตอนด้านล่างคือลำดับมาตรฐานของเราสำหรับพื้นอีพอกซี: แต่ละขั้นตอนทำอะไร ตามมาตรฐานใด และเราตรวจอะไรตอนส่งมอบ สำหรับโรงงานของคุณ เราปรับจำนวนชั้นและความหนาตามภาระจริง สารเคมี และช่วงเวลาที่หยุดผลิตได้

  1. 01

    Substrate assessment

    Bond, contamination and moisture checks decide which renovation route is viable. The assessment decides between a resurfacing route and a full rebuild — pricing and schedule follow from it.

  2. 02

    Removal & repair

    Failed coatings and loose material ground off; cracks and holes repaired. After stripping, strength is re-tested; areas still short go deeper.

  3. 03

    Densifier route

    Penetration, reaction and progressive polishing bring the slab back harder than new. For dusting floors this route is preferred — no added film, the slab itself is hardened.

  4. 04

    Coating route

    Penetrating primer, build-up and a new topcoat matched to the zone duty. Renovation coatings lean on primer penetration; fast-absorbing areas take a double primer.

  5. 05

    Phased return to service

    Zones come back between shifts; production barely notices. Before each zone returns, a clean-down and protection briefing prevents cross-scratching.

ภาพหน้างาน

พื้นที่เสร็จแล้วถ่ายหน้างานจริง — คลิกเพื่อขยายและตรวจสอบรายละเอียด

Densified old slab

A dusting floor brought back to a dense, polished surface.

Renovated working floor

New build-up over a sound slab — production never stopped.

โครงการตัวอย่าง

โครงการที่กลุ่มบริษัทส่งมอบบางส่วน

  • Automotive paint-shop renovation

    Renovating a live paint shop is a scheduling problem before it is a flooring one. For automotive clients including FAW, SAIC, Dongfeng, Beijing Benz, Geely, BYD, XPeng and NIO, we strip and re-lay floors zone by zone inside the owner's maintenance windows while the rest of the shop keeps producing.

  • Pharmaceutical workshop renewal without shutdown

    For clients such as Shineway Pharmaceutical, Huahai Pharmaceutical and Xinhua Pharmaceutical we have renewed workshop floors without stopping production: zoning, dust containment and low-odour solvent-free materials keep the clean areas clean while we work next door.

  • Residential garage refurbishment

    Older residential garages fail at the joints, the ramps and the oily bays first. On projects such as China Merchants' Cuican Mansion and the Xipai Jingyue development we renew traffic lanes and bays in phases, keeping half the garage usable throughout.

คำถามที่พบบ่อย

สิ่งที่ผู้ซื้อถามมากที่สุดเมื่อเลือกวัสดุเคลือบพื้น

Our floor is dusting badly. Densifier or coating?

If you need a hard, dust-free concrete surface and speed, densify. If you need colour, chemical resistance or washability, coat it — often both routes combine zone by zone.

ดูเพิ่มเติม
Can we avoid tearing out the old floor?

Usually yes. As long as the slab is structurally sound, the new system goes over it after grinding and repair — no demolition.

ดูเพิ่มเติม
How fast can we get back to work?

Densified areas come back within days; coated zones follow the curing plan. Everything is phased so shifts keep running.

ดูเพิ่มเติม
The old coating is still sticking in places — can it stay?

Possibly — adhesion testing decides. Sound, well-bonded areas can stay and be bridged; failing areas must go, or they will drag the new system down with them.

ดูเพิ่มเติม

เล่าเรื่องพื้นของคุณให้เราฟัง

ส่งเนื้อฐาน พื้นที่ และสิ่งที่พื้นต้องทน คุณจะได้รับระบบที่แนะนำ แบบโครงสร้างชั้น และใบเสนอราคา — โดยปกติภายในหนึ่งวันทำการ

ขอใบเสนอราคา