ZHENGOU GroupZHENG'OU

การใช้งาน

เคมี & อุตสาหกรรมหนัก

การโจมตีของกรด ด่าง และตัวทำละลายร่วมกับความร้อนกระชาก ไวนิลเอสเทอร์และโพลียูรีเทนในที่ที่อีพอกซีทั่วไปจะเป็นฟอง

พื้นนี้ต้องทนอะไร

เข้าใจรูปแบบความเสียหายก่อนเลือกระบบ

  1. 01

    Acids, alkalis and solvents attack the floor daily — standard epoxy dissolves here.

  2. 02

    Thermal shock from hot processes and cold washdown works coatings loose from the slab.

  3. 03

    Spillage must not reach the concrete — or the ground beneath it.

  4. 04

    Mechanical damage — impacts, pallet edges, trolleys — opens paths for chemicals to attack.

เคมี & อุตสาหกรรมหนัก

ระบบเคลือบที่แนะนำ

คัดเลือกตามภาระการใช้งาน — ไม่มีระบบสำเร็จรูป มีเพียงระบบที่เหมาะสม

01

Vinyl ester heavy-duty anti-corrosion system (fiberglass-reinforced)

โครงสร้างชั้น
Vinyl ester primer → fiberglass mat lamination (layers as required) → vinyl ester mortar → vinyl ester topcoat

The fiberglass lamination bridges cracks and carries the chemical load — the standard answer for acid, alkali and solvent duty.

ลำดับการทำงานมาตรฐาน

พื้นเดียวกันกับวัสดุเดียวกันอาจใช้งานได้ยาวนานขึ้นหลายปีหากทำงานอย่างประณีต หกขั้นตอนด้านล่างคือลำดับมาตรฐานของเราสำหรับพื้นอีพอกซี: แต่ละขั้นตอนทำอะไร ตามมาตรฐานใด และเราตรวจอะไรตอนส่งมอบ สำหรับโรงงานของคุณ เราปรับจำนวนชั้นและความหนาตามภาระจริง สารเคมี และช่วงเวลาที่หยุดผลิตได้

  1. 01

    Substrate preparation

    Grinding, repair and drying; the slab must be sound before any corrosion barrier goes on. Defects such as cracks and voids are located and marked one by one, and repaired before any corrosion work starts.

  2. 02

    Vinyl ester primer

    Primer bonds the system to the slab and is the first chemical barrier. Penetration is confirmed zone by zone; under-fed areas get an extra coat.

  3. 03

    Fiberglass lamination

    Fiberglass mat is wetted out layer by layer in vinyl ester — the reinforcement that bridges cracks. Mat overlaps are staggered as the system requires, with air worked out layer by layer.

  4. 04

    Mortar coat

    Vinyl ester mortar builds thickness and levels the reinforced surface. The mortar doubles as the second barrier; corners and pipe penetrations are thickened with a coved transition.

  5. 05

    Topcoat

    Vinyl ester topcoat seals the system into one continuous chemical barrier. After the topcoat, appearance and build are re-checked against the design before handover.

ภาพหน้างาน

พื้นที่เสร็จแล้วถ่ายหน้างานจริง — คลิกเพื่อขยายและตรวจสอบรายละเอียด

Fiberglass build-up

Multi-layer fiberglass lamination mid-installation.

Topcoat application

Vinyl ester topcoat applied over large areas — the final chemical barrier taking shape.

Completed resin surface

The continuous resin surface before final inspection.

โครงการตัวอย่าง

โครงการที่กลุ่มบริษัทส่งมอบบางส่วน

  • Jiaxing Geno Electric anti-corrosion project

    Anti-corrosion coating for cable junction boxes and cable trays. Electrical equipment lives in damp, corrosive environments; vinyl-ester systems are applied layer by layer to steel components and junction boxes to lengthen maintenance intervals.

  • Kaide New Energy industrial base (Guangzhou)

    Abrasion-resistant flooring and anti-corrosion works, Lot 1. With a short build programme and overlapping trades at the new-energy base, works were organised as a flowing sequence so flooring and anti-corrosion were handed over together.

  • Wanhua Chemical

    A group framework cooperation newly awarded in 2025. Chemical plants concentrate flooring and anti-corrosion needs in workshops, tank farms and pipe racks; we recommend vinyl-ester or polyurethane systems zone by zone according to the chemicals present.

  • Shougang Group heavy-industrial sites

    Steel and heavy-industry buildings combine abrasion, heat and chemical exposure under one roof. We supply flooring materials to Shougang Group sites, selecting systems zone by zone according to the medium and load each area actually sees.

  • Minth Automotive Europe plant, Serbia

    A 2020 overseas supply project: we exported a complete vinyl ester package — resin, surface coating, fiberglass mats and cloth, corundum sand and application tools — from Shanghai to the buyer's plant in Loznica, Serbia. The floor was built as a fiberglass-reinforced vinyl ester system ("five cloth, seven coat") covering roughly 100,000 m².

คำถามที่พบบ่อย

สิ่งที่ผู้ซื้อถามมากที่สุดเมื่อเลือกวัสดุเคลือบพื้น

Which chemicals can the system withstand?

The vinyl ester range is tested against acids, alkalis and solvents at defined concentrations — the results are published per product on the site. Send us your chemical list and we confirm the fit.

ดูเพิ่มเติม
Why lay fiberglass cloth?

Concrete moves and cracks; the fiberglass lamination carries those movements and keeps the chemical barrier continuous above them.

ดูเพิ่มเติม
Our plant has both acid and alkali zones — one system?

In many cases yes; where duty differs sharply, we vary the topcoat between zones while keeping one overall programme.

ดูเพิ่มเติม
Can you renovate a failed anti-corrosion floor?

Yes — the assessment decides whether the sound layers stay and only the top is rebuilt, or the system is redone from the slab. Both keep the plant running zone by zone.

ดูเพิ่มเติม

ผลิตภัณฑ์ที่มักใช้ที่นี่

จับคู่กับระบบด้านบน เปิดหน้าผลิตภัณฑ์เพื่อดูข้อมูลทางเทคนิคและรายงานการทดสอบ

ชั้นบนไวนิลเอสเทอร์ต้านการกัดกร่อนหนักโพลียูรีเทน & ต้านการกัดกร่อน

ชั้นบนไวนิลเอสเทอร์ต้านการกัดกร่อนหนัก

ชั้นบนไวนิลเอสเทอร์หนักทนกรดซัลฟิวริก 98% และโซดาไฟอุ 50% รับรองตาม ISO 12944 C5-M ทนการเสื่อมสภาพ QUV 3,000 ชม. และใช้งานกลางแจ้งได้นานกว่า 15 ปี

ดูรายละเอียด
ชั้นบนไวนิลเอสเทอร์ใสต้านการกัดกร่อนหนักโพลียูรีเทน & ต้านการกัดกร่อน

ชั้นบนไวนิลเอสเทอร์ใสต้านการกัดกร่อนหนัก

ชั้นบนไวนิลเอสเทอร์ใสหนัก ความใส ≥ 90%: ทนการเสื่อมสภาพ UV 5,000 ชม. ไม่เหลืองกลางแจ้ง 10 ปี คงสภาพลักษณะฐานไว้เดิม

ดูรายละเอียด
ชั้นกลางไวนิลเอสเทอร์ต้านการกัดกร่อนหนักโพลียูรีเทน & ต้านการกัดกร่อน

ชั้นกลางไวนิลเอสเทอร์ต้านการกัดกร่อนหนัก

ชั้นกลางไวนิลเอสเทอร์ทนกรดซัลฟิวริก 98% และโซดาไฟอุ 40%; แรงยึดเกาะ ≥ 8 MPa บนเหล็ก และ ≥ 3.5 MPa บนคอนกรีต พร้อมการกันน้ำซึมผ่าน ≥ 1.5 MPa

ดูรายละเอียด
พร้อมเมอร์ไวนิลเอสเทอร์ใสโพลียูรีเทน & ต้านการกัดกร่อน

พร้อมเมอร์ไวนิลเอสเทอร์ใส

พร้อมเมอร์ไวนิลเอสเทอร์ซึมระดับนาโน 5–8 มม. แรงดึง ≥ 3.5 MPa ทน pH 2–14 และเคลือบซ้ำได้ใน 1.5 ชั่วโมง

ดูรายละเอียด

เล่าเรื่องพื้นของคุณให้เราฟัง

ส่งเนื้อฐาน พื้นที่ และสิ่งที่พื้นต้องทน คุณจะได้รับระบบที่แนะนำ แบบโครงสร้างชั้น และใบเสนอราคา — โดยปกติภายในหนึ่งวันทำการ

ขอใบเสนอราคา